青岛佰盛仪器有限公司为您提供广东石油检测仪器,广东柴油检测仪器,广东石化检测仪器等相关信息发布和资讯展示,敬请关注!
0532-82181093

广东德国耶拿进样垫402-889.050

广东德国耶拿进样垫402-889.050

广东德国耶拿分析仪器股份公司(Analytik Jena AG, 简称AJ公司)成立于1990年,前身为卡尔.蔡司(Carl-Zeiss Jena GmbH)公司的分析仪器部, 今天已成为德国最大的分析仪器公司之一。公司总部设在世界光学精密仪器制造中心的德国耶拿(Jena)市。目前Analytik Jena在全球90多个国家设有分支机构。公司的宗旨是不断创新和追求活力。支柱是其久负盛名的分析仪器。

Analytik Jena  在短短的几年里先后收购了IDC公司的股份,全面接管了卡尔.蔡司实验室分析仪器的业务,收购了DOCTER OPTIC在Eisfeld 的工厂,并于1996年通过EN ISO 9001质量认证。因为其良好的财务状况和发展前景而在德国法兰克福交易所成为股票上市公司。

公司目前的主要业务是研究、开发、设计和生产制造总有机碳(TOC)/总氮(TN)分析仪,有机卤素化合物(AOX)分析仪,元素(C、S、N、Cl)分析仪;原子吸收光谱仪(AAS)和紫外/可见(UV/VIS)分光光度计和生化分析仪器等。另外,Analytik Jena不仅生产制造分析仪器而且还提供实验室的一体化解决方案。

EA3100常用备件订货信息:

货号 英文描述 中文描述

402-889.050 Septum 12.5mm 进样垫(每袋5个)

402-889.137 sample filter UVF/CLD 检测器过滤膜(每袋20个)

402-889.143 Xenon  lamp 氙灯

402-823.048 Membrane dryer 膜式干燥器

402-890.012 Type III combustion tube 燃烧管

402-881.244 particles filter, set of 5 颗粒物过滤片

analytikjena

Consumables multi EA 5000

effective from 01.01.2010

  Priority Order number Description

Consumables general

   402-889.527 Auto-Protection valve assembly, complete

no picture available

  B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces   

  402-889.652 Flow test kit

no picture available   

A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces

   402-007.513 FAST connector, 1 piece   

(adaptor angeled for gas tubings, black)

   402-801.317 Fuse for furnace unit   

T 10 A H, 20 mm

402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece

402-889.510 Multi purpose combustion tube

B 402-825.045 Tweezers, straight, truncated

B 402-889.092 Sample vials, 2 ml, set of 100 pieces (for sample rack with 112 positions) 402-889.558 PTFE filter plate, d = 25 mm  (Auto protection replacement filter)

Set of 5 pieces

402-820.129 Oxygen and argon gas supply tubing

FEP, OD 6 mm (sold by meter), 1 m

 A 402-889.306 Screw cap with hole, GL 18

402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces

402-889.583 Special sealing 12 mm

(FAST connector at outlet of multi purpose combustion tube)

   402-822.118 Heat resistent gloves, 1 pair

Sampling modules

MMS 5000

402-812.374 Replacement screw

(mounting of autosampler on the basic unit/ ABD)

A 402-823.079 Removable needles for 50 and 100 μl syringes, set of 3 pieces

402-886.248 Waste hose

A 402-889.206 Septum for rinsing vessel

402-889.533 Syringe 50 μl, with removable needle, without markings

402-889.534 Syringe 100 μl, with removable needle, without markings   402-889.547 Gripper for sample boats

Autoinjector

402-889.589 Syringe 10 μl, for Autoinjector, with removable needle

recommended for higher element concentrations and systems with carbon module 402-889.592 Syringe 100 μl, for Autoinjector, with removable needle

402-889.590 Syringe 20 μl, for Autoinjector, with removable needle

recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)

402-889.591 Syringe 40 μl, for Autoinjector, with removable needle

recommended as standard syringe for N/S systems

A 402-889.186 Removable special needles, set of 3 pieces

Manual Boat Drive - MBD

no picture

available

402-815.839 Sealing for sample port MBD

402-889.671 Feed  tube for MBD

402-889.672 Hook for MBD

402-889.670 MBD coupling tube, glass

402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Automatic boat drive - ABD

402-889.551 ABD coupling tube, glass

402-886.236 Sealing for sample port ABD

A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing

A 402-889.073 Feed tube, for MVS shunt/ABD

A 402-889.066 Hook, for MVS shunt/ABD

suitable from MVS serial number  509 046 and higher

402-815.838 O-ring 14 mm x 4 mm for ABD

402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

402-889.560 Set of sealing elements horizontal

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

A 402-889.039 Adsorption material, set of 3 pieces

Gas Sampling System - GSS

B 402-889.148 Replacement septum for gas sampling bag 10 l, 1 piece

402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece 402-820.123 Ferrule for injection needle, vertical operation, 1 piece

B 402-889.147 Gas sampling bag 10 l for GSS and GSS type C, 1 piece

A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

no picture

available

402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

LPG Module and GSS/LPG combi module

402-889.439 Bubble vessel

402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece 402-820.123 Ferrule for injection needle, vertical operation, 1 piece

A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation mode

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

multi EA 5000: for bubble vessel

A 402-881.116 O-ring, i.d. = 6 mm x 3 mm

multi EA 5000: for screw cap GL 14 bubble vessel

no picture

available

402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

Detection

Sulfur / nitrogen / carbon detection

no picture

available

402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l

no picture

available

402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l   B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank

B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank

no picture

available

B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l)

B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l)

A 402-823.048 Membrane dryer

B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

A 402-889.313 Absorber tube for  Sulfur coulometer, glass

402-820.110 Connecting hose 1/8", (sold by meter), 1m

A 402-889.302 Diaphragma for titration cell of Sulfur coulometer

A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer

A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer

A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass

A 402-520.137 Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer

A 402-889.303 Cathode  for titration cell of Sulfur coulometer

A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer

402-884.015 Packet with one charge of silver wool

A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer

A 402-889.306 Screw cap with hole, GL 18

A 402-889.304 Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer

A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces 402-889.300 Titration cell for Sulfur coulometer, glass

A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer

TC/TOC-Module

B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection

B 402-885.019 Halogen absorber, complete with U-tube

402-810.050 Halogen absorber filling (copper- and brass wool)

A 402-885.017 High-temperature mat, set of 3 pieces

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

402-889.657 Condensation coil

no picture available

B 402-810.059 Special catalyst platinum, sufficient for 5 refills

A 402-810.048 Special catalyst platinum, one refill

B 402-886.318 Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g

A 402-825.044 Quartz wool, 1 packet

402-889.659 Septum TIC vessel

no picture available

402-889.658 Septum combustion tube

no picture available

402-881.245 Set of TC prefilter and water trap

402-889.594 Syringe 250 μl with vent and removable needle

(for autosampler)

402-889.593 Syringe 500 μl with vent and removable needle

(for autosampler)

no picture

available

402-889.656 TIC vessel

A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

no picture

available

402-889.655 Combustion tube

Chlorine Detection

402-815.831 Hose to connect suction extractor at workplace or vent

lengh 70 cm

402-889.549 Connecting part (metal) for  gas transfer line

with outside thread

402-825.123 Beaker for sulfuric acid vessel

402-889.561 Replacement hose for heated gas transfer line

402-820.053 Ferrule for connecting part (metal)

for gas transfer line with outside thread

402-820.055 Ferrule for screw joint

gas transfer line with inside thread

402-889.559 Gas transfer hose

no picture

available

no picture

available

B 402-889.071 Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B 402-889.166 Chlorine Calibration Kit (10 - 100 mg/l) incl. blank

no picture

available

B 402-889.163 Chlorine Calibration Kit (100 - 500 mg/l)

A 402-520.177 ferrule set,  1/4" TFE

402-30003 Ferrule set,  1/8" PTFE

402-825.124 Petri dish for sulfuric acid vessel

402-889.569 Tubing inside sulfuric acid vessel with ferrule

402-889.508 sulfuric acid vessel with outlet

402-889.507 Safety cowl for the sulfuric acid tank

402-825.108 Funnel for sulfuric acid vessel

402-889.573 Connector sulfuric acid vessel

A 402-30031 Swagelok screw fitting, 1/4" onto 1/8", PTFE

Chlorine detection with chlorine module high sensitive

B 402-890.007 Storage vessel for sensor electrode

A 402-889.085 Mounting to connect suction extractor at workplace, NS

14.5 brown glass

402-99998 preamplifier for sensor electrode

A 402-889.123 Gas introduction tube

A 402-889.124 Set of rubber plugs; 1 x NS14, 1 x NS7

A 402-889.112 Internal electrolyte sensor electrode, 50 ml

A 402-815.023 Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece

A 402-889.006 Platinum electrode

A 402-889.184 Electrolyte bridge

B 402-889.110 Salt solution to make up 100 ml electrolyte

A 402-889.002 Sensor electrode     402-889.536 Silver electrode

Chlorine detection with titration cells sensitive and high concentration

402-889.538 Storage vessel for combination electrode

B 402-880.605 Disposable tube 18 mm x 6 mm, filled

packet of 10 pieces, for AOX determination (column method)

402-890.610 Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)

A 402-880.211 Combination electrode (ceramic)

A 402-815.022 Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece

402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.

Specifications and order numbers are subject to changes due to further technical development

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms and Conditions of Analytik Jena AG.

来源:http://gd.baishengyiqi.com/product737369.html

发布时间:2021-6-5 14:22:25

相关资讯

相关产品